Jeton Wallet

Overview

Jeton Wallet is a payment method that allows customers to perform purchases by using e-wallets and to make payouts to customers. Purchases are performed by using Payment Page and Gate, payouts by using Gate.

General information

Payment method type e-wallet payments
Countries and regions IN, JP, TR
Payment currencies EUR, GBP, INR, JPY, NOK, PLN, RUB, TRY, USD
Currency conversion on the Jeton Wallet side
Purchases +
Payouts +
Stored credentials payments
Full refunds
Partial refunds
Chargebacks
Notes
Currencies for settlements with merchants by request
Processing times for settlements with merchants usually immediately
Onboarding and access fee Refer to your key account manager ECommPay

Interaction diagram

Payment processing by using the Jeton Wallet payment method requires merchant's web service, one of ECommPay interfaces, and the ECommPay payment platform, as well as the Jeton Wallet technical facilities.



Operations support

  Interfaces Amounts
Payment Page CMS Plug-ins Gate Dashboard minimum maximum
Purchases + + 1.00 100,000.00
Payouts + 1.00 100,000.00

Processing scenarios

In the Jeton Wallet method, purchases and payouts follow different processing procedures. To perform a purchase operation, you need to redirect customer to the Jeton Wallet service, while to initiate a payout, you need to notify customer via merchant's web service.

Figure: Purchase by using Payment Page



Figure: Purchase by using Gate



Figure: Payout by using Gate



The sections that follow provide detailed information about what you need to perform payments and how you can analyse the information on payments and operations.

Purchase by using Payment Page

General information

In the Jeton Wallet method, to perform a purchase by using Payment Page, the merchant web service should send a request with all the required parameters and signature to the ECommPay URL and get the callback with the payment result from the payment platform. When opening Payment Page, you can have Payment Page opened with the Jeton Wallet method selected. For more information about preselecting payment methods, see in Preselecting payment method.

The full sequence and particularities of the purchase process are provided below.



Figure: Purchase sequence by using Payment Page

  1. A customer initiates a purchase on the merchant's web service.
  2. The web service sends the request for Payment Page opening to the specified ECommPay URL.
  3. The request for opening is redirected to the payment platform.
  4. The payment platform performs the initial request processing that involves validation of the required parameters and signature.
  5. Requested Payment Page is generated into the ECommPay payment platform as specified in the project settings and the request parameters.
  6. Payment Page is displayed to the customer.
  7. The customer selects the Jeton Wallet method.
  8. The payment platform receives the purchase request for payment processing from Payment Page.
  9. The payment platform performs the internal purchase request processing and sends it to the Jeton Wallet service.
  10. The purchase request is processed on the Jeton Wallet service side.
  11. The Jeton Wallet service generates the data for redirecting the customer to its website form and sends it to the payment platform.
  12. The payment platform sends the customer redirection data to Payment Page.
  13. The customer is redirected to the Jeton Wallet website.
  14. The customer completes all the payment steps required.
  15. The payment is processed on the Jeton Wallet side.
  16. The result is displayed to the customer on the Jeton Wallet website.
  17. The customer is redirected to Payment Page.
  18. The Jeton Wallet service sends the result notification to the payment platform.
  19. The payment platform sends a callback with the payment result to the web service.
  20. The payment platform sends the result to Payment Page.
  21. A page with the payment result information is displayed to the customer on Payment Page.

The sections that follow discuss in more details the request format and the Payment Page parameters to use in the Jeton Wallet payment method and provide the information on the format of callbacks with payment results. For the general information on how to use the API, see Payment Page API Description.

Request format

There are several things you need to consider when using the Jeton Wallet method:

  1. You must provide values for the basic minimum of parameters. Listed below are the parameters that are mandatory for any payment method:
    • customer_id—the unique ID of the customer within your project
    • project_id—the project ID obtained from ECommPay
    • payment_id—payment ID unique within the project
    • payment_currency—payment currency in ISO-4217 alpha-3 format
    • payment_amount—payment amount in minor units
  2. The currencies of payment can be: EUR, GBP, INR, JPY, NOK, PLN, RUB, TRY, USD .
  3. Also you can pass additional parameter—payment_description.
  4. If you need to have payment form displayed with the Jeton Wallet method selected, specify the force_payment_method parameter—jetonWalletV3.

    For the Jeton Wallet method we support two versions of its API. The payment method code depends on the version, that was integrated with the web service. For more information on the code you should use, refer to the ECommPay key account manager or to the ECommPay technical support.

  5. If required, you can also add any other additional parameters Payment Page supports.
  6. After you specify all the parameters you need, you must create the signature for the request. For instructions on how to sign a payment request, see Signature generation and verification.

Thus, a correct payment request in the Jeton Wallet method must include project, customer, and payment IDs, the currency and the amount of a payment in the appropriate currency, as shown in the following example:

EPayWidget.run(
    { payment_id: 'X03936', 
      payment_amount: 10000, 
      payment_currency: 'EUR',
      customer_id: '123', 
      project_id: 1236,
      signature: "kUi2x9dKHAVNU0FYldJrxh4yo+52Kt8KURLCvhtT4DqtOcZzUCwX6R\/ekpZhkIQg=="
    }
)

For information about all parameters available in the Jeton Wallet method, see Payment Page invocation parameters.

Callback format

The Jeton Wallet method uses the standard format for callbacks to deliver purchase results. For more information, see Callbacks.

The following is the example of a callback with an information about successful 100.00 EUR purchase on account 24954373 made by the 1780597 customer in the 1236 project.

Figure: Example of a successful purchase callback

    {
        "project_id": 1236,
        "payment": {
            "id": "ac17805971555",
            "type": "purchase",
            "status": "success",
            "date": "2019-04-15T16:31:44+0000",
            "method": "JetonWallet",
            "sum": {
                "amount": 10000,
                "currency": "EUR"
            },
            "description": "deposit"
        },
        "account": {
            "number": "24954373"
        },
        "customer": {
            "id": "1780597"
        },
        "operation": {
            "id": 26516000001352,
            "type": "sale",
            "status": "success",
            "date": "2019-04-15T16:31:44+0000",
            "created_date": "2019-04-15T16:31:13+0000",
            "request_id": "ea8d37edbe06c6ccdbd47fe899e4fb",
            "sum_initial": {
                "amount": 10000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 10000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": "3573001",
                "auth_code": ""
            },
            "code": "0",
            "message": "Success"
        },
        "signature": "4xSp9GkRnFLNFnGjvz1V1njeE0c+VLZqnpMJe6iSiOi+bSvLtiTV7kFTQYJsQ=="
    }

The following is the example of a callback for a purchase declined because the customer account is no longer available.

Figure: Example of a declined purchase callback

    {
        "customer": {
            "id": "1780597"
        },
        "payment": {
            "date": "2019-05-13T17:47:49+0000",
            "id": "980d0031ad2ac8cb2e3de4061d4bf955",
            "method": "JetonWallet",
            "status": "decline",
            "sum": {
                "amount": 50000,
                "currency": "EUR"
            },
            "type": "purchase",
            "description": "deposit"
        },
        "project_id": 382,
        "operation": {
            "id": 29469000002026,
            "type": "sale",
            "status": "decline",
            "date": "2019-05-13T17:47:49+0000",
            "created_date": "2019-05-13T17:32:47+0000",
            "request_id": "cb10fd9119976eddd9360720130b98f60676c",
            "sum_initial": {
                "amount": 50000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 50000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": "3785266",
                "auth_code": ""
            },
            "code": "20106",
            "message": "Customer account is no longer available"
        },
        "signature": "vVaazCs++R+PXqAWMa7HqjIowpUEZzDBPERxp9SkEQ0L6No+UcEQwtDlpOpeA=="
    }

Related topics

The following topics might be useful when implementing payments by using Payment Page:

Purchase by using Gate

General information

In the Jeton Wallet methods, when processing a purchase by using Gate, the merchant web service is required to do the following:

  1. Send a request with all the required parameters and signature to the ECommPay URL.
  2. Perform the redirection of a customer to the Jeton Wallet service.
  3. Get the callback with the payment result from the payment platform.

The following diagram provides the detailed picture of the payment processing procedure.



Figure: Purchase by using Gate

  1. A customer initiates a purchase through Jeton Wallet on the merchant's web service side.
  2. The web service sends the request for processing the purchase by using Gate to the specified ECommPay URL.
  3. The payment platform receives the request for processing the purchase from Gate.
  4. The payment platform performs the initial request processing that includes validation of the required parameters and signature.
  5. The payment platform sends the response with request receipt confirmation and correctness check result to the web service. For more information, see Response format.
  6. The payment platform performs the internal payment request processing and redirects the request to the Jeton Wallet service.
  7. The request is processed on the Jeton Wallet side.
  8. The Jeton Wallet service sends the data for redirecting the customer to the Jeton Wallet service to the payment platform.
  9. The payment platform sends the callback with the redirection data in the return_url object to the web service.
  10. The customer is redirected from the web service to the Jeton Wallet service.
  11. The customer completes all the payment steps required.
  12. The payment is processed on the Jeton Wallet side.
  13. The result is displayed to the customer.
  14. The customer is redirected to the merchant's web service.
  15. The Jeton Wallet service sends the payment result notification to the payment platform.
  16. The ECommPay payment platform sends a callback to the web service.
  17. The customer receives the payment result on the web service.

The sections that follow discuss in more details the request format and the Gate parameters to use in the Jeton Wallet payment method and provide the information about formats of the data for redirecting customers and the information about the format of callbacks with payment results. The general information about working with API see in the API Description section.

Request format

There are several things you must consider when using purchase requests in the Jeton Wallet method:
  1. You perform purchase by sending the /v2/payment/wallet/jeton/sale request by using POST (HTTP) method. This request refers to the payment by using e-wallets request group: /v2/payment/wallet/{payment_method}/sale.
  2. The following objects and parameters must be specified in any request:
    • Object general—general purchase information:
      • project_id—project identifier
      • payment_id—unique purchase identifier
    • Object customer—customer information:
      • id—the unique ID of the customer within your project
      • ip_address—customer IP address
    • Object payment—purchase information:
      • amount—purchase amount
      • currency—payout currency in the ISO-4217 alpha-3 format.
    • Object return_url—URL for redirecting a customer from the Jeton Wallet website:
      • success—URL for redirecting a customer after a performed purchase
      • decline —URL for redirecting a customer after a declined purchase
  3. The currencies of payment can be: EUR, GBP, INR, JPY, NOK, PLN, RUB, TRY, USD .
  4. If required, you can also add any other additional parameters Gate supports.

Thus, a correct payment request in the Jeton Wallet method must include project, customer and payment IDs, currency and amount of the purchase, customer IP-address, and the return URLs, as shown in the following example:

Figure: Purchase request example

{
    "general": {
      "project_id": 1236,
      "payment_id": payment_id,
      "signature": "PJkV8ejrtyUG0Di8hTng6JvC7vQsaC6tajQVVfBaNIipTv+AWoXW\/9MTO8yJA=="
    },
    "payment": {
      "amount": 10000,
      "currency": "EUR"
      },
    "customer": {
      "id": "123",
      "ip_address": "248.121.176"
    },
    "return_url":{
      "decline" : "http://return.url",
      "success" : "http://return.url"
    }
}

Formats of the customer redirection data

To redirect a customer from the web service to the Jeton Wallet service, you must receive a callback from the payment platform containing the URL for redirection in the redirect_data.url parameter and data to be sent in the request body in the redirect_data.body parameter, and use these parameters when opening the HTML page using the method specified in the redirect_data.method parameter.

The following is the callback fragment containing the redirection data.


 "redirect_data": {
             "body": [],
             "method": "GET",
             "url": "https://www.jetoncheckout.com/pay?token=eyJhbGciOiJIUzUxMiJ9.eyJjcmVhdGVkQX"
                }

Callback format

The Jeton Wallet method uses the standard format for callbacks to deliver purchase results. For more information, see Callbacks.

The following is the example of a callback with an information about successful 100.00 EUR purchase on account 24954373 made by the 1780597 customer in the 1236 project.

Figure: Example of a successful purchase callback

    {
        "project_id": 1236,
        "payment": {
            "id": "ac17805971555",
            "type": "purchase",
            "status": "success",
            "date": "2019-04-15T16:31:44+0000",
            "method": "JetonWallet",
            "sum": {
                "amount": 10000,
                "currency": "EUR"
            },
            "description": "deposit"
        },
        "account": {
            "number": "24954373"
        },
        "customer": {
            "id": "1780597"
        },
        "operation": {
            "id": 26516000001352,
            "type": "sale",
            "status": "success",
            "date": "2019-04-15T16:31:44+0000",
            "created_date": "2019-04-15T16:31:13+0000",
            "request_id": "ea8d37edbe06c6ccdbd47fe899e4fb",
            "sum_initial": {
                "amount": 10000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 10000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": "3573001",
                "auth_code": ""
            },
            "code": "0",
            "message": "Success"
        },
        "signature": "4xSp9GkRnFLNFnGjvz1V1njeE0c+VLZqnpMJe6iSiOi+bSvLtiTV7kFTQYJsQ=="
    }

The following is the example of a callback for a purchase declined because the customer account is no longer available.

Figure: Example of a declined purchase callback

    {
        "customer": {
            "id": "1780597"
        },
        "payment": {
            "date": "2019-05-13T17:47:49+0000",
            "id": "980d0031ad2ac8cb2e3de4061d4bf955",
            "method": "JetonWallet",
            "status": "decline",
            "sum": {
                "amount": 50000,
                "currency": "EUR"
            },
            "type": "purchase",
            "description": "deposit"
        },
        "project_id": 382,
        "operation": {
            "id": 29469000002026,
            "type": "sale",
            "status": "decline",
            "date": "2019-05-13T17:47:49+0000",
            "created_date": "2019-05-13T17:32:47+0000",
            "request_id": "cb10fd9119976eddd9360720130b98f60676c",
            "sum_initial": {
                "amount": 50000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 50000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": "3785266",
                "auth_code": ""
            },
            "code": "20106",
            "message": "Customer account is no longer available"
        },
        "signature": "vVaazCs++R+PXqAWMa7HqjIowpUEZzDBPERxp9SkEQ0L6No+UcEQwtDlpOpeA=="
    }

Related topics

The following topics might be useful when implementing payments through Gate:

Payout by using Gate

General information

To perform a payout through the Jeton Wallet method, merchant's web service sends a request with all the required parameters and signature to ECommPay URL, and receives a callback with the payment result. The full sequence of the payout process is provided below.



Figure: Payout by using Gate

  1. A customer orders a payout through one of the supported banks from Jeton Wallet group.
  2. Merchant's web service sends the payout request for processing the payout by using Gate to the appropriate ECommPay URL.
  3. Gate redirects the request to the ECommPay payment platform.
  4. The payment platform performs all the necessary check and processes the request.
  5. The reply with the request processing results is sent to the merchant's web service. For more information, see Response format.
  6. The payment platform redirects the payout request to the Jeton Wallet service.
  7. The payout is processed on the bank side.
  8. Jeton Wallet sends the result notification to the payment platform.
  9. The payment platform sends a callback with the payment result to the web service.
  10. The customer receives the payout result from the web service.

The sections that follow discuss in more details the request format and the Gate parameters to use in the Jeton Wallet payment method and provide the information on the format of callbacks with payout results.

Request format

There are several things you must consider when using payout requests in the Jeton Wallet method:
  1. You perform payouts by sending the /v2/payment/wallet/jeton/payout request by using POST (HTTP) method. This request refers to the payment by using e-wallets request group: /v2/payment/wallet/{payment_method}/payout
  2. The following objects and parameters must be specified in any request:
    • Object general—general payout information:
      • project_id—project identifier
      • payment_id—unique payout identifier
      • signature—signature created after you specify all the required parameters. For more information about signature generation, see Signature generation and verification
    • Object customer—customer information:
      • ip_address—customer IP address
    • Object account—customer account information:
      • number—customer account number
    • Object payment—payout information:
      • amount—payout amount
      • currency—payout currency in the ISO-4217 alpha-3 format.
  3. The currencies of payment can be: EUR, GBP, INR, JPY, NOK, PLN, RUB, TRY, USD .
  4. If required, you can also add any other additional parameters Gate supports.

Thus, a correct payment request in the Jeton Wallet method must include project and payment IDs, account number (for crediting), customer IP address, currency and amount of the payout, as shown in the following example:

Figure: Example of a payout request

{
  "general": {
    "project_id": 239,
    "payment_id": "63bc5d64b5a869cb5bf2",
    "signature": "PJkV8ej\/UG0Di8hTncV+VHq3LwY3T\/pOMeSaRfBaNIipTv+AWoXW\/9MTO8yJA=="
  },
 "account":{
    "number": "93017949",
 },
 "customer": {
    "ip_address": "248.121.176.220"
  },
  "payment": {
    "amount": 30000,
    "currency": "EUR"
  }
}

Callback format

The Jeton Wallet method uses the standard format for callbacks to deliver payout results. For more information, see Callbacks.

The following is the example of a callback with an information about successful 300.00 EUR payout to the 543085 customer account 93017949 in the 239 project.

Figure: Example of a successful payout callback

  
    {
        "project_id": 239,
        "payment": {
            "id": "63bc5d64b5a869cb5bf2",
            "type": "payout",
            "status": "success",
            "date": "2019-01-15T09:36:37+0000",
            "method": "JetonWallet",
            "sum": {
                "amount": 30000,
                "currency": "EUR"
            },
            "description": "withdrawal"
        },
        "account": {
            "number": "93017949"
        },
        "customer": {
            "id": "543085"
        },
        "operation": {
            "id": 631000002690,
            "type": "payout",
            "status": "success",
            "date": "2019-01-15T09:36:37+0000",
            "created_date": "2019-01-15T09:36:35+0000",
            "request_id": "dad57124547",
            "sum_initial": {
                "amount": 30000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 30000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": "",
                "auth_code": ""
            },
            "code": "0",
            "message": "Success"
        },
        "signature": "nCLpal3AzJTJrXtG2/TA8toaV5EQoMslNzAmBNFWIouA6SGOsDrlZhH9cTQ=="
    }

The following is the example of a callback for a payout declined due to insufficient funds on the merchant balance.

Figure: Example of a declined payout callback

   
     {
        "project_id": 239,
        "payment": {
            "id": "59212aab8827751ee5865514c6670c86",
            "type": "payout",
            "status": "decline",
            "date": "2018-11-23T01:00:27+0000",
            "method": "JetonWallet",
            "sum": {
                "amount": 30000,
                "currency": "EUR"
            },
            "description": "withdrawal"
        },
        "account": {
            "number": "94082236"
        },
        "customer": {
            "id": "429166"
        },
        "errors": [
            {
                "code": "3028",
                "message": "Insufficient funds on merchant balance",
                "description": "public: BALANCE_INSUFFICIENT_FUNDS"
            }
        ],
        "operation": {
            "id": 14479000001965,
            "type": "payout",
            "status": "decline",
            "date": "2018-11-23T01:00:27+0000",
            "created_date": "2018-11-23T01:00:27+0000",
            "request_id": "c3dbddac",
            "sum_initial": {
                "amount": 30000,
                "currency": "EUR"
            },
            "sum_converted": {
                "amount": 30000,
                "currency": "EUR"
            },
            "provider": {
                "id": 1079,
                "payment_id": ""
            },
            "code": "3028",
            "message": "Insufficient funds on merchant balance"
        },
        "signature": "MwjSnpJdMzrallOtnkvTZKB5+x3LmqtECi7IhBjAIYDHPSY9/Mg/wCaUOlw=="
    }

Related topics

The following topics might be useful when implementing payments through Gate:

Analysis of payments results

As with other payment methods ECommPay offers, when using the Jeton Wallet method, you have several options to analyse the information about payments and operations performed by using the method—alone or in conjunction with other methods.

You can load and analyse all the necessary information in Dashboard, for instance you can use the analytic panels on the Analytics tab to this end.

Also, you can export the information for further analysis by using third party analytical tools. The following options are available:

  • Dashboard allows you to download reports in CSV and XLS formats—by using the tools on the Payments tab. You can perform export as a one-time download to your local computer or have payment data regularly exported and delivered to email addresses you specify.
  • Data API allows you to have payment information exported in JSON format and delivered to a URL you specify. The payment information is exported by using the /operations/get queries.

If you have any further questions regarding payment data analysis, contact ECommPay technical support.